Calibration is a fundamental (but often overlooked) step in the process of measurement. It ensures that the instrument which is used for testing accurately indicates the required measurement parameter and that the instrument is performing to its specification.

Calibration defines the accuracy and quality of measurements recorded using a piece of equipment. Over time there is a tendency for results and accuracy to 'drift', particularly when using particular technologies or measuring particular parameters such as temperature and humidity. To be confident in the results being measured there is an ongoing need to service and maintain the calibration of equipment throughout its lifetime for reliable, accurate, and repeatable measurements.

The goal of calibration is to minimize any measurement uncertainty by ensuring the accuracy of test equipment. Calibration quantifies and controls errors or uncertainties within measurement processes to an acceptable level.

B-ADVANCY has the Capacity to perform Calibration:

▶️ Dimension

▶️ Mass & Volume

▶️ Thermal

▶️ Pressure

▶️ Force

▶️ Electro Technical

Industrial Testing Service

B-ADVANCY industrial services cater to the need of a wide spectrum of power generation, power sector, shipbuilding, steel building, cement plant, gas field, gas transmission, gas distribution, fertilizer, chemical industry, and any short of the process plant.

Non-Destructive Testing (NDT)

▶️ Ultrasonic Test(UT)

▶️ Radiography Test(RT)

▶️ Magnetic Practical Test(MPT)

▶️ Lifting and Pressure Equipment Load Test

▶️ Dye Penetrant Testing(DPT)

▶️ Hardness Test

▶️ Vibration Test

▶️ Destructive Test

▶️ Vacuum Test

▶️ Roughness Test

▶️ Lube Oil Testing etc.

Inspection:

▶️ Post-Landing Inspection

▶️ Pre-shipment Inspection

▶️ Electrical Safety Assessment (Thermographic Scanning, Earth Resistance & LPS Test)

▶️ Fire Safety Assessment

▶️ Visual Inspection

▶️ Hatch Leak Inspection

▶️ WPS (MS, SS, AI)

▶️ Lifting and Pressure Equipment Inspection

▶️ Welding Inspection

▶️ Insurance Servey (Land, Motor, Property & Damage Goods)

▶️ Container Servey

▶️ Valuation Survey

▶️ 3rd party Inspection